Hitec HRC36946 D946TW Digital HV High Torque Servo
The titanium D-945TW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitecâs industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Features
- Programmable PWM Digital Amplifier
- 32Bit MCU with 12Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25Tooth Output Spline
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- Dust Resistant and Splash Proof Case
Specs
- Operating Voltage Range (Volts DC): 4.8V ~ 6.0V ~ 7.4V
- Speed (Second @ 60°): 0.16 ~ 0.12 ~ 0.10
- Maximum Torque Range oz. / in.: 194 ~ 250 ~ 319
- Maximum Torque Range kg. / cm.: 14.0 ~ 18.0 ~ 23.0
- Current Draw at Idle: 30 mA
- No Load Operating Current Draw: 470 mA
- Stall Current Draw: 6,200 mA
- Dead Band Width: 1 ”s
- Dimensions (Inches): 1.57 x 0.79 x 1.50
- Dimensions (Metric): 40.0 x 20.0 x 38.0
- Weight (Ounces): 2.4
- Weight (Gram): 68
- Circuit Type: 32bit Programable Digital
- Motor Type: Coreless Metal Brush
- Gear Material: Titanium
- Bearing Type: Dual Ball Bearing
- Output Shaft (type / Ămm): H25T
- Case Material: Plastic / Aluminum
- Dust / Water Resistance: Splash Proof
- Connector Gauge (AWG) / Strand Count: 20 / 80
Original: $171.11
-65%$171.11
$59.89Hitec HRC36946 D946TW Digital HV High Torque Servo
The titanium D-945TW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitecâs industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Features
- Programmable PWM Digital Amplifier
- 32Bit MCU with 12Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25Tooth Output Spline
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- Dust Resistant and Splash Proof Case
Specs
- Operating Voltage Range (Volts DC): 4.8V ~ 6.0V ~ 7.4V
- Speed (Second @ 60°): 0.16 ~ 0.12 ~ 0.10
- Maximum Torque Range oz. / in.: 194 ~ 250 ~ 319
- Maximum Torque Range kg. / cm.: 14.0 ~ 18.0 ~ 23.0
- Current Draw at Idle: 30 mA
- No Load Operating Current Draw: 470 mA
- Stall Current Draw: 6,200 mA
- Dead Band Width: 1 ”s
- Dimensions (Inches): 1.57 x 0.79 x 1.50
- Dimensions (Metric): 40.0 x 20.0 x 38.0
- Weight (Ounces): 2.4
- Weight (Gram): 68
- Circuit Type: 32bit Programable Digital
- Motor Type: Coreless Metal Brush
- Gear Material: Titanium
- Bearing Type: Dual Ball Bearing
- Output Shaft (type / Ămm): H25T
- Case Material: Plastic / Aluminum
- Dust / Water Resistance: Splash Proof
- Connector Gauge (AWG) / Strand Count: 20 / 80
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The titanium D-945TW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitecâs industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Features
- Programmable PWM Digital Amplifier
- 32Bit MCU with 12Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25Tooth Output Spline
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- Dust Resistant and Splash Proof Case
Specs
- Operating Voltage Range (Volts DC): 4.8V ~ 6.0V ~ 7.4V
- Speed (Second @ 60°): 0.16 ~ 0.12 ~ 0.10
- Maximum Torque Range oz. / in.: 194 ~ 250 ~ 319
- Maximum Torque Range kg. / cm.: 14.0 ~ 18.0 ~ 23.0
- Current Draw at Idle: 30 mA
- No Load Operating Current Draw: 470 mA
- Stall Current Draw: 6,200 mA
- Dead Band Width: 1 ”s
- Dimensions (Inches): 1.57 x 0.79 x 1.50
- Dimensions (Metric): 40.0 x 20.0 x 38.0
- Weight (Ounces): 2.4
- Weight (Gram): 68
- Circuit Type: 32bit Programable Digital
- Motor Type: Coreless Metal Brush
- Gear Material: Titanium
- Bearing Type: Dual Ball Bearing
- Output Shaft (type / Ămm): H25T
- Case Material: Plastic / Aluminum
- Dust / Water Resistance: Splash Proof
- Connector Gauge (AWG) / Strand Count: 20 / 80
